Phrozen UV/DLP ABS Like 0.5l creamy-white
Phrozen’s ABS-like Resins creates high-resolution, sturdy models and are best for general modeling and industrial applications. With its light color, it is also exceptionally suitable for painting models after the curing process.
Phrozen ABS like Creamy White Specifications
- Volume: 500g per bottle
- XY Planar Resolution: 0.050 mm
- Z Resolution (Layer Height): 30-100um
- Property: High hardness, toughness and resolution.
- Way to Rinse：Clean with alcohol spray with air gun
- Suitable for: LCD 3D Printer
- Application: General modeling & prototyping
- Suggest to use our resin and printer indoor under ventilated situation.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve our resin in closed opaque bottle in avoid of exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin away from kids.
- Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.
- Do not eat and swallow the resin. Go to hospital if necessary.
- Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
- Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature(15 – 35 OC) and dry condition.
Viscosity: 77 cps
Tg: 70 °C
Elongation: 2 %
Break Value: 12 MPa
Surface Hardness: Shore 79D
I-Zod Impact: 2.32 KJ/m2
Volume: 500g per bottle
XY Planar Resolution: 0.050 mm
Z Resolution (Layer Height): 30-100um
Property: High hardness and toughness, and resolution. Its light color is suitable for post-process, like painting.
Ways to Rinse: Clean with alcohol spray with air gun
Suitable For: Phrozen 3D Printer Series
Applications: General modeling & Industrial prototype proofing